The frame from the ground up. (part 1)

The initial ability to stand with a functional frame is an important first stage in IMA body methods.
I thought i would throw up a quick post on some of the points for setting up the body frame ready for standing or movement practice. There is much greater detail that can be discussed, especially in terms of how the anatomical lines spiral and link to each other. But to begin with lets talk about the basics.

1. Feet
The feet are your best receptor for recognising how your body weight is paced. Listen to what the feet tell you in terms of position of pressure. The foot provides and all round receptor to feel motion forward back and side to side. The primary contact points of the feet are generally the toes, metatarsal heads (ball of the foot),  Outer longitudinal Arch and the heal.
To help us recognise and find the central point in relation to the feet, rock back and forward, making the movement smaller and smaller until you arrive at the central point with the balance evenly distributed. Repeat this rocking side to side.

2. The Toes
The toes play a very important role in how the foot connects with the earth. They help to control balance and stability but also allow us to connect more securely with the ground itself. We should lightly grasp the earth as if the feet were plungers or suckers.  This has the effect of activating the ‘bubbling well’ point just back from the metatarsal heads in the centre of the foot, which increases the connection with the earth.

3. Knees
The knee alignment is of huge importance when working with static postures or slow movement training when load is constant. We need to make sure that the knees follow their correct path. The Knee is in essence a weigh transfer joint, allowing articulation in a very strict limited direction, when compared to the hip for example which is what I call a movement joint. If we try to make the knees go in directions outside of this plane they will suffer tissue damage.
To maintain the proper alignment we should make sure than the knee follows the line of the big toe. The knee should be softly bent and relaxed, not locked or overly flexed so that the thigh muscles are working a lot.

4. Pelvis and related level
The pelvis is the base of the body lines. It is a very important area to set up correctly when starting to work with internal body mechanics. We need to look at the tissues surrounding the pelvis as well as the connections too it and the position of the bones themselves in order to set the rest of the body us correctly.
a. Relax the Glutimus Maximus. Your buttocks should be soft and relaxed, this will have the effect of helping to drop the coccyx down levelling up the pelvis.
b. Relax and open the Inguinal Crease. Also known as the Kwa we need to relax this meeting point of the thigh with the hips and let this crease naturally open up. This will further let the pelvis sink and sit naturally.
c. Pull up through the inside line of the legs. This will have the effect of stabilizing and ‘setting up’ the lower frame like the arch of a bridge and will help to maintain exchange up through the Hui Yin (perineum) point.

5. lower back and lower abdominals.
To help the pelvis find the right position we need to release and control the postion and state of the lower trunk of the body. There are two major areas to focus on. The Thoracolumbar Fascia plays an important role in correctly relaxing the lower back. This may take some time to come under conscious control so that you can release the area and allow the pelvis to hand in the correct position.  Also relaxing the transverse abdominis will allow the pelvis to sit even further down in a pendulum style position from the spine.

6. Spine
The spine should be straightened smoothing out the lumbar curve somewhat. But this should not be an enforced process of reversing the curves. The method is to lengthen the spine from the crown of the head. As we have already relaxed the structures around the pelvis the lower back should be relatively flat anyway. So the focus should be on extending to the top of the head, eliminating the outward curve of the upper back and inward curve of the neck. The feeling of pulling the chin in helps to open up the neck somewhat.

7. Rib cage
we want to aim for balance in the setting up of the frame, therefor its important not to collapse the chest inwards or puff it out. But rather keep it naturally in the centre. The rib cage will sit naturally allowing the diaphragm to work well aand keeping preasure of f the lungs and heart. When done correctly the chest will seem to hollow ( not cave in but become hollow inside) and the internal body weight will sink to the lower abdomen.
The other important point here is that the upper back remains naturally centred as well. The back should not be curved out or flexed back.

8. Scapular
The connection through the top of the back between the sides of the body is an important area to ‘set up’ in this initial building of the frame. The scapular should sit flat to the back, sunk and in towards the spine without undue tension in the creation of the posture. This will have the effect of pulling the shoulders back slightly in their socket and allowing the chest to be natural.

9. Shoulders and Arms
The shoulders are important as they are the movement joint for the arms much like the role of the hips for the legs. The shoulders should be sat down in position with the Trapezius muscle very soft and open. The more the shoulders are pulled up by the traps the less connected to the body frame they will be.
The result of correctly seated shoulders is that the arms should have the sensation of ‘filling up’ . Here we need to release the elbow joint by softening as much as possible and letting gravity do its work. The same is true of the wrist and finger joints.

10. Neck, face and head
The head and especially the face is often full of unrecognised tension and emotional residual tensions. If we are going to work freely we need to begin to desolve these points of tension from the outset. Practice releasing the Neck, then the face, then the tissue over the skull with every out breath. As you relax more and more the entire frame should start to be felt as a single unit. Allowing you to begin whatever work your going to start.

As i say there is a lot more detail that we can go into .. in Part two we will talk about.
- Drawing up with the legs,
- Arms and legs like drills
- Winding around the body
- Ming Men and Taodao
- Breath integration
- Intent driven structure setting.

Happy training